It’s pretty unusual for a Keurig® to develop a fault as we have found them to be very reliable over the years. However, there are common problems that do arise across the different models and we have set out solutions to these problems below.
Keurig Not Working – Problem With Your Keurig® Coffee Brewer
Not Ready Message
Sometimes you may receive a “Not Ready” message on your Keurig®. But not to worry as this can be easily fixed with a few easy steps to follow.
First turn off the brewer and unplug it from the wall; then detach the water reservoir. After waiting at least five seconds repeat these steps in their opposite direction now by plugging the brewer back in, turning it on and replacing the water reservoir back into the unit. You will probably still have a “Not Ready” message, so press the menu button several times and then lower the handle down.
You should now be ready to go with your favorite brew. You can also now reset the clock etc as is required.
Keurig 2.0 Touch Screen Power Button Not Working?
The first thing to do is check to see if the brewer is actually plugged; we know, you checked that already … but you would be surprised how that old plug isn’t sitting right or never quite made it into the plug. The other thing to watch out for is if you have it plugged into a GFI outlet, which stands for Ground Fault Interrupter (or sometimes called a surge protector).
If the brewer is plugged into a GFI then it may have … Read on Gather baltimore